Babysense Hisense 5s Baby Safe Infant Movement Monitor – Reviews, Questions & Answers

Babysense Hisense 5s Baby Safe Infant Movement Monitor

Babysense Hisense 5s Baby Safe Infant Movement Monitor features

  • Baby sense is a highly sensitive device that monitors and detects even the slightest movements through the mattress.
  • The control unit is connected to sensor pads placed between infant’s mattress and crib or bed base.
  • The passive sensor system is totally safe and has no direct contact with the infant.
  • Baby sense sounds an alarm alerting to check the baby if no movement is detected for more than 20 seconds or if the movement rate slows to less than 10 micro-movements per minute.
  • 2 round sensor pads size 8.5 inches (21.6 cm)

Download user manual

Babysense Hisense 5s Baby Safe Infant Movement Monitor
 

check-price-on-amazonBabysense 5 – When time could mean life…

Babysense is a highly sensitive non-touch baby breathing and movement monitor.Now you can get the piece of mind when your baby sleeps. Babysense is very useful for detection of respiratory cessation (apnea) in babies. Babysense gives an alert when ever your baby stops breathing or do any irregular breaths. Babysense constantly monitors your baby through the mattress. We know that a quick response can make a huge difference between something minor and a critical situation when it comes to babysitting.
Babysense is the original and first of its kind breathing movement monitor at today’s market. All different versions which are available today on the market are result of this amazing product.

Babysense product was born in the view of the dangers that little infants may face in hospitals and at homes associated with sudden infant death syndrome which is commonly known as SIDS and Cot or Crib Death. SIDS remains a significant cause of death among basically healthy infants up to one year of age.
There are over 600,000 babies have been protected from SIDS by implementing Babysense breathing movement monitor around the world. Babysense has now become a vital measure of protection which provides safety and peace of mind when used with safe sleeping precautions.
Babysense is a registered class lib medical device, certified in accordance with CE Directive 93/42/EEC. It is also clinically tested in hospitals and used in government health programs targeting to provide parents and healthcare providers with enhanced means to cope with threats associated with SIDS.

Babysense
Babysense 5 – When Time Could Mean Life

Babysense is a highly sensitive non-touch baby Breathing Movement Monitor. Now parents can get the piece of mind while their baby sleeps. Babysense is intended for detection of respiratory cessation (apnea) in babies. It constantly monitors baby’s breathing micro movements through the mattress during sleep and gives an alert to caretakers if breathing stops or becomes irregularly slow, giving critical time to intervene. A quick response can make the difference between something minor and a critical situation.

Babysense is the original and first-to-market Breathing Movement Monitor in its kind. All derivations which are available today on the market are a result of this breakthrough in development.

Babysense was developed in view of the dangers that infants may face in hospitals and at homes associated with sudden infant death syndrome (commonly known as SIDS and Cot or Crib Death). SIDS remains a significant cause of death among basically healthy infants up to one year of age.

Babysense breathing movement monitor is highly effective and has helped protecting over 600,000 babies from SIDS around the world. Babysense is a vital measure of protection, which, when combined with safe sleeping precautions provides safety and peace of mind.

Babysense is a registered class IIb medical device, certified in accordance with CE Directive 93/42/EEC. It is clinically tested in hospitals and used in government health programs targeting to provide parents and healthcare providers with enhanced means to cope with threats associated with SIDS.

check-price-on-amazon

Babysense 5 – How It Works

Babysense 5 baby breath movment monitor reviews

Babysense technology along with its highly sensitive sensor pads allow monitoring and detecting even the slightest breathing movements through the mattress.

Babysense is more than just a commonly known MOVEMENT MONITOR.

Babysense breathing movement monitor alerts caregivers about a potential threat before it strikes and not only after the baby stopped breathing.

The control unit is connected to Babysense sensor pads placed between infant’s mattress and crib or bed base.

Babysense monitors operate on regular AA batteries, so there are no dangeroud power cords. Babysense 5 features a new “Hidden Cable Installation” concept.

The passive sensor system is totally safe and has no direct contact with the baby.

Babysense breathing movement monitor identifies your baby’s respiratory patterns which are transmitted to a compact microprocessor, in the Babysense control unit, where they trigger a flashing green light that is clearly visible from a distance. The flashing blue light is the signal that all is well, providing a parent or caretaker with peace of mind.

If, for whatever reason, no breathing is detected within 20 seconds, or if the breath rate slows to less than 10 breaths per minute, an audible alarm will sound.

On hearing this alarm, a parent or caretaker is alerted to come to the aid of the sleeping baby.
Babysense 5 – So Easy To Use

  • 1 Simply place two sensor pads under the crib mattress.
  • 2 Sensor pads monitor entire crib area.
  • 3 Sensor pads do not touch the baby.
  • 4 Babysense operates on regular household batteries – no cords, no plugs, no connection to mains.
  • 5 Compact, attractive, easy to use design with single switch operation.
  • 6 Affordable price.
  • 7 Parents will be alerted if baby is experiencing a respiratory distress or stops breathing.
  • 8 Babysense is medically approved and clinically tested to ensure your baby’s safety.

check-price-on-amazon

Babysense 5 – A Wise Investment

Babysense breathing movement monitor has been proven to save babies’ lives.

Variations in breathing patterns occur in all infants. Babies frequently “miss a breath”. This is normal and not considered harmful. A simple cold, an allergy or a virus can quickly cause an infant’s temperature to rise. This will affect the child’s ease and rate of breathing. These situations must be monitored because they can quickly worsen and require prompt medical intervention. SIDS happens quickly and comes without warning. Without a breathing movement monitor, a parent would have to be in the room constantly and even then a cessation in breathing might go unnoticed.

No parent can go without sleep for long. Repeated wakeful nights, listening for sounds of distress or being awakened by an infant’s cries quickly take their toll on a parent’s health and patience. This is an unhealthy situation for both parent and child.

Using Babysense breathing movement monitor in crib, cradle or bed have helped hundreds of thousands of parents get the rest they need. Parents can enjoy much needed rest knowing that should there be be a change in their child’s breathing pattern, Babysense will immediately alert them. This is of immense value, and it can mean the difference between sleep and no sleep.


Babysense Hisense 5s Baby Safe Infant Movement Monitor
 

check-price-on-amazon

Please click on a question to see its answers.

Q:I’m really torn between this monitor and the angel care. Any experience with both?

A:

I’ve only used the Babysense, but we have friends with the Angel Care who seem to get many more false alarms than we do. I was bothered by the flashing blue light when in operation, but our child seems unaffected by it.

Q:My baby usually ends up rolling into a corner of her crib in the night. Will this create false alarms?

A:

I haven’t had ANY false alarm. I LOVE this! It was actually used in a research study!! Well worth the money. I LOVE that you can roll over and see it blinking to have peace of mind. As a NICU mom that came home with babies on medical monitors.. I feel this is just as good. Be careful of the sensitivity though. It can pick up fans and if the bassinet is close to your bed it can pick up your movements. So be sure to test it without the baby in while the fan is going and other regular movements around it. :-).

Q:Do you need to use both pads together? If so, can you fit both in a bassinet?

A:

You only use one in a bassinet, and then connect both once your baby moves to a bigger cot and starts to move around a little.

Q:Has anybody used this if the baby is swaddled? Would this product still be effective?

A:

Yes, it is. Our baby slept swaddled during the first two months.

Q:My baby is a side sleeper. Will this work if he sleeps on his side?.

A:

Yes

Q:Will this work under a Naturepedic Mattress (http://www.amazon.com/Naturepedic-Co…

A:

Yea

Q:From the website of Hisense, I know that Babysense II is clinically tested. As a new generation product, is Babysense 5s also clinically tested?

A:

The Babysense 5s product has undergone the same testing as the Babysense V.

Q:Would this work oversees with 220V?

A:

Yes. It works with a battery and does not plug into the electric. The battery has a very long life.

Q:Is there any way of just getting the sound alarm and turning off the blue flashing light?

A:

I don’t believe so, but the blue flashing light lets you know it is working. Of course, if the system is working properly, the alarm will sound if baby stops moving, but the light is what lets you know it is working. I read where some people would apply tape over the light to dim it a little. Hope this helps.

Q:Does it matter how thick the babies crib mattress is? Looking to get a mattress 5 1/2 inches thick unless that is too thick for monitor.

A:

I have a 3 inch mattress and it works great

check-price-on-amazon

Q:How do you use it with a pack ‘n play given the wires??? I am just not sure how to set this up. Thanks in advance!

A:

First, the sensor(s) need to be on a Solid surface. If pack and play has a fabric bottom then you need a board to put under the sensor. One sensor should be enough. Since the wires go under the mattress pad, they can be hidden and fastened against the side post where they come out to connect to the control module. It’s really meant for a crib although some use it with porta cribs and pack and play. Best to contact BabySense’s customer support to confirm best setup.

Q:Will it be effective when used with a Pack ‘n Play Playard?

A:

I haven’t used it with a pack’n’play but did think about using it in my Graco pack’n’play. However, I decided against it because I would need to by an extra board to go under the mattress as the sensor needs to be on a firm base. Plus I would need to run the cords either up the inside of the graco or cut a hole in the side mesh so the cords from the sensor pads could be connected to the alarm unit.

Q:Does this monitor also monitor sound or is it just movement? Just wondering if I would need a separate monitor to be able to hear when the baby wakes

A:

It doesn’t not do sound, so you would need a separate audio/video monitor for that.

Q:Is this model wireless?

A:

Hi Brooke,

No, this model is not wireless.

Q:Do you think this product can be used effectively with something other than a traditional crib? Such as the Clear-Vue Co-Sleeper by Arm’s Reach?

A:

Yes but you will most likely have to put some thing hard for the sensor to rest on. It has to be on a hard surface and under the mattress….so as long as you can do that, it should work fine. Also, you will probably also need to figure out a way to place the alarm portion since it’s meant to rest between the mattress and hard surface as well and stick outside the crib bars, but that is something you can work out.

Q:Can this product be used with twins or are 2 systems needed? Is there an issue with interference if 2 units are used?

A:

You would need 2 units as there would only be one control module. You need a separate one for each crib.

Q:How do you use it with a pack ‘n play given the wires??? I am just not sure how to set this up. Thanks in advance!

A:

First, the sensor(s) need to be on a Solid surface. If pack and play has a fabric bottom then you need a board to put under the sensor. One sensor should be enough. Since the wires go under the mattress pad, they can be hidden and fastened against the side post where they come out to connect to the control module. It’s really meant for a crib although some use it with porta cribs and pack and play. Best to contact BabySense’s customer support to confirm best setup.

Q:Will it be effective when used with a Pack ‘n Play Playard?

A:

I haven’t used it with a pack’n’play but did think about using it in my Graco pack’n’play. However, I decided against it because I would need to by an extra board to go under the mattress as the sensor needs to be on a firm base. Plus I would need to run the cords either up the inside of the graco or cut a hole in the side mesh so the cords from the sensor pads could be connected to the alarm unit.

Q:Does this monitor also monitor sound or is it just movement? Just wondering if I would need a separate monitor to be able to hear when the baby wakes

A:

It doesn’t not do sound, so you would need a separate audio/video monitor for that.

Q:Is this model wireless?

A:

Hi Brooke,

No, this model is not wireless.

Q:Do you think this product can be used effectively with something other than a traditional crib? Such as the Clear-Vue Co-Sleeper by Arm’s Reach?

A:

Yes but you will most likely have to put some thing hard for the sensor to rest on. It has to be on a hard surface and under the mattress….so as long as you can do that, it should work fine. Also, you will probably also need to figure out a way to place the alarm portion since it’s meant to rest between the mattress and hard surface as well and stick outside the crib bars, but that is something you can work out.

Q:Can this product be used with twins or are 2 systems needed? Is there an issue with interference if 2 units are used?

A:

You would need 2 units as there would only be one control module. You need a separate one for each crib.

Q:How do you use it with a pack ‘n play given the wires??? I am just not sure how to set this up. Thanks in advance!

A:

First, the sensor(s) need to be on a Solid surface. If pack and play has a fabric bottom then you need a board to put under the sensor. One sensor should be enough. Since the wires go under the mattress pad, they can be hidden and fastened against the side post where they come out to connect to the control module. It’s really meant for a crib although some use it with porta cribs and pack and play. Best to contact BabySense’s customer support to confirm best setup.

Q:Will it be effective when used with a Pack ‘n Play Playard?

A:

I haven’t used it with a pack’n’play but did think about using it in my Graco pack’n’play. However, I decided against it because I would need to by an extra board to go under the mattress as the sensor needs to be on a firm base. Plus I would need to run the cords either up the inside of the graco or cut a hole in the side mesh so the cords from the sensor pads could be connected to the alarm unit.

Q:Does this monitor also monitor sound or is it just movement? Just wondering if I would need a separate monitor to be able to hear when the baby wakes

A:

It doesn’t not do sound, so you would need a separate audio/video monitor for that.

Q:Is this model wireless?

A:

Hi Brooke,

No, this model is not wireless.

Q:Do you think this product can be used effectively with something other than a traditional crib? Such as the Clear-Vue Co-Sleeper by Arm’s Reach?

A:

Yes but you will most likely have to put some thing hard for the sensor to rest on. It has to be on a hard surface and under the mattress….so as long as you can do that, it should work fine. Also, you will probably also need to figure out a way to place the alarm portion since it’s meant to rest between the mattress and hard surface as well and stick outside the crib bars, but that is something you can work out.

Q:Can this product be used with twins or are 2 systems needed? Is there an issue with interference if 2 units are used?

A:

You would need 2 units as there would only be one control module. You need a separate one for each crib.

Q:How do you use it with a pack ‘n play given the wires??? I am just not sure how to set this up. Thanks in advance!

A:

First, the sensor(s) need to be on a Solid surface. If pack and play has a fabric bottom then you need a board to put under the sensor. One sensor should be enough. Since the wires go under the mattress pad, they can be hidden and fastened against the side post where they come out to connect to the control module. It’s really meant for a crib although some use it with porta cribs and pack and play. Best to contact BabySense’s customer support to confirm best setup.

Q:Will it be effective when used with a Pack ‘n Play Playard?

A:

I haven’t used it with a pack’n’play but did think about using it in my Graco pack’n’play. However, I decided against it because I would need to by an extra board to go under the mattress as the sensor needs to be on a firm base. Plus I would need to run the cords either up the inside of the graco or cut a hole in the side mesh so the cords from the sensor pads could be connected to the alarm unit.

Q:Does this monitor also monitor sound or is it just movement? Just wondering if I would need a separate monitor to be able to hear when the baby wakes

A:

It doesn’t not do sound, so you would need a separate audio/video monitor for that.

Q:Is this model wireless?

A:

Hi Brooke,

No, this model is not wireless.

Q:Do you think this product can be used effectively with something other than a traditional crib? Such as the Clear-Vue Co-Sleeper by Arm’s Reach?

A:

Yes but you will most likely have to put some thing hard for the sensor to rest on. It has to be on a hard surface and under the mattress….so as long as you can do that, it should work fine. Also, you will probably also need to figure out a way to place the alarm portion since it’s meant to rest between the mattress and hard surface as well and stick outside the crib bars, but that is something you can work out.

Q:Can this product be used with twins or are 2 systems needed? Is there an issue with interference if 2 units are used?

A:

You would need 2 units as there would only be one control module. You need a separate one for each crib.

Q:How do you use it with a pack ‘n play given the wires??? I am just not sure how to set this up. Thanks in advance!

A:

First, the sensor(s) need to be on a Solid surface. If pack and play has a fabric bottom then you need a board to put under the sensor. One sensor should be enough. Since the wires go under the mattress pad, they can be hidden and fastened against the side post where they come out to connect to the control module. It’s really meant for a crib although some use it with porta cribs and pack and play. Best to contact BabySense’s customer support to confirm best setup.

Q:Will it be effective when used with a Pack ‘n Play Playard?

A:

I haven’t used it with a pack’n’play but did think about using it in my Graco pack’n’play. However, I decided against it because I would need to by an extra board to go under the mattress as the sensor needs to be on a firm base. Plus I would need to run the cords either up the inside of the graco or cut a hole in the side mesh so the cords from the sensor pads could be connected to the alarm unit.

Q:Does this monitor also monitor sound or is it just movement? Just wondering if I would need a separate monitor to be able to hear when the baby wakes

A:

It doesn’t not do sound, so you would need a separate audio/video monitor for that.

Q:Is this model wireless?

A:

Hi Brooke,

No, this model is not wireless.

Q:Do you think this product can be used effectively with something other than a traditional crib? Such as the Clear-Vue Co-Sleeper by Arm’s Reach?

A:

Yes but you will most likely have to put some thing hard for the sensor to rest on. It has to be on a hard surface and under the mattress….so as long as you can do that, it should work fine. Also, you will probably also need to figure out a way to place the alarm portion since it’s meant to rest between the mattress and hard surface as well and stick outside the crib bars, but that is something you can work out.

Q:Can this product be used with twins or are 2 systems needed? Is there an issue with interference if 2 units are used?

A:

You would need 2 units as there would only be one control module. You need a separate one for each crib.

Q:How do you use it with a pack ‘n play given the wires??? I am just not sure how to set this up. Thanks in advance!

A:

First, the sensor(s) need to be on a Solid surface. If pack and play has a fabric bottom then you need a board to put under the sensor. One sensor should be enough. Since the wires go under the mattress pad, they can be hidden and fastened against the side post where they come out to connect to the control module. It’s really meant for a crib although some use it with porta cribs and pack and play. Best to contact BabySense’s customer support to confirm best setup.

Q:Will it be effective when used with a Pack ‘n Play Playard?

A:

I haven’t used it with a pack’n’play but did think about using it in my Graco pack’n’play. However, I decided against it because I would need to by an extra board to go under the mattress as the sensor needs to be on a firm base. Plus I would need to run the cords either up the inside of the graco or cut a hole in the side mesh so the cords from the sensor pads could be connected to the alarm unit.

Q:Does this monitor also monitor sound or is it just movement? Just wondering if I would need a separate monitor to be able to hear when the baby wakes

A:

It doesn’t not do sound, so you would need a separate audio/video monitor for that.

Q:Is this model wireless?

A:

Hi Brooke,

No, this model is not wireless.

Q:Do you think this product can be used effectively with something other than a traditional crib? Such as the Clear-Vue Co-Sleeper by Arm’s Reach?

A:

Yes but you will most likely have to put some thing hard for the sensor to rest on. It has to be on a hard surface and under the mattress….so as long as you can do that, it should work fine. Also, you will probably also need to figure out a way to place the alarm portion since it’s meant to rest between the mattress and hard surface as well and stick outside the crib bars, but that is something you can work out.

Q:Can this product be used with twins or are 2 systems needed? Is there an issue with interference if 2 units are used?

A:

You would need 2 units as there would only be one control module. You need a separate one for each crib.

Q:How do you use it with a pack ‘n play given the wires??? I am just not sure how to set this up. Thanks in advance!

A:

First, the sensor(s) need to be on a Solid surface. If pack and play has a fabric bottom then you need a board to put under the sensor. One sensor should be enough. Since the wires go under the mattress pad, they can be hidden and fastened against the side post where they come out to connect to the control module. It’s really meant for a crib although some use it with porta cribs and pack and play. Best to contact BabySense’s customer support to confirm best setup.

Q:Will it be effective when used with a Pack ‘n Play Playard?

A:

I haven’t used it with a pack’n’play but did think about using it in my Graco pack’n’play. However, I decided against it because I would need to by an extra board to go under the mattress as the sensor needs to be on a firm base. Plus I would need to run the cords either up the inside of the graco or cut a hole in the side mesh so the cords from the sensor pads could be connected to the alarm unit.

Q:Does this monitor also monitor sound or is it just movement? Just wondering if I would need a separate monitor to be able to hear when the baby wakes

A:

It doesn’t not do sound, so you would need a separate audio/video monitor for that.

Q:Is this model wireless?

A:

Hi Brooke,

No, this model is not wireless.

Q:Do you think this product can be used effectively with something other than a traditional crib? Such as the Clear-Vue Co-Sleeper by Arm’s Reach?

A:

Yes but you will most likely have to put some thing hard for the sensor to rest on. It has to be on a hard surface and under the mattress….so as long as you can do that, it should work fine. Also, you will probably also need to figure out a way to place the alarm portion since it’s meant to rest between the mattress and hard surface as well and stick outside the crib bars, but that is something you can work out.

Q:Can this product be used with twins or are 2 systems needed? Is there an issue with interference if 2 units are used?

A:

You would need 2 units as there would only be one control module. You need a separate one for each crib.


Babysense Hisense 5s Baby Safe Infant Movement Monitor
 

check-price-on-amazon